SICK
SICK is a prominent worldwide producer of sensors, safety systems, and automated identification solutions intended for use in process, logistical, and factory automation. SICK provides affordable factory automation, distribution centre optimization, and monitoring solutions. SICK has almost 70 years of expertise in the market introducing cutting-edge solutions, making it the industry standard for automation applications.
From factory automation to logistics automation and process automation, SICK’s sensor solutions are keeping the industry moving. As a technology and market leader, SICK provides sensor intelligence and application solutions that create the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents, and preventing damage to the environment.
-
LFP2000-A5NMC Level Sensor, Rod Probe, 2,000mm Long, G3/4A, 1 x PNP + 3 x PNP/NPN + 4 mA … 20 mA, M12 8 Pin Connector (1062263)
$983.25 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
RE23-SA84 Non-Contact Magentic Safety Switch, 2 N/O Contacts, 0.2m Cable w/ M8 4 Pin Connector (1062541)
$142.97 inc. GSTAvailable on backorder
RE2 magnetic safety switches are equipped with either complementary NC/NO contacts or equivalent N/O contacts which are addressed directly with coded magnetic actuators. Magnetic safety switches are used in areas where a high level of contamination occurs. They are simple to clean, thereby enabling high standards of hygiene. Their principle of operation enables greater tolerances, making them ideal for applications where precise guidance of the protective device is difficult. • Response range of up to 9 mm • 2 or 3 contacts • Up to performance level PL e / Cat. 4 (EN ISO 13849) • Sensors with plug connector or connected cable • LED status indicator (RE27) • Flexi Loop-compatible M12 plug connector (depending on variant) Features • Long service life due to durable and low-maintenance design • Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849) • High level of machine availability due to high tolerances for door misalignment • The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards • Fast diagnostics via LED status indicator (RE27) • Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort. -
RE23-SA64 Non-Contact Magentic Safety Switch, 2 N/O Contacts, 0.2m Cable w/ M12 4 Pin Connector (1062542)
$147.08 inc. GSTAvailable on backorder
RE2 magnetic safety switches are equipped with either complementary NC/NO contacts or equivalent N/O contacts which are addressed directly with coded magnetic actuators. Magnetic safety switches are used in areas where a high level of contamination occurs. They are simple to clean, thereby enabling high standards of hygiene. Their principle of operation enables greater tolerances, making them ideal for applications where precise guidance of the protective device is difficult. • Response range of up to 9 mm • 2 or 3 contacts • Up to performance level PL e / Cat. 4 (EN ISO 13849) • Sensors with plug connector or connected cable • LED status indicator (RE27) • Flexi Loop-compatible M12 plug connector (depending on variant) Features • Long service life due to durable and low-maintenance design • Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849) • High level of machine availability due to high tolerances for door misalignment • The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards • Fast diagnostics via LED status indicator (RE27) • Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort. -
WTB2SC-2P3244A00 Photoelectric Proximity Sensor, Background Supression, Sn= 4mm … 110mm, PNP, Cable with M8 4 Pin Male Connector (1063550)
$353.80 inc. GSTAvailable on backorder
The incredibly small latest generation W2S-2 miniature photoelectric sensor offers completely new machine design possibilities. Intelligent features: the sensors feature background suppression that enables detection of black objects with a degree of reflection of 1%. The W2S-2 also offers world-class sensing distances in this housing size. Whether it is used in machines in the pharmaceutical industry, in logistics handling applications or in automatic assembly equipment, the ultra-compact W2S-2 offers optimal performance and high reliability in industrial environments. Industry 4.0 is already on board: Both the sensing distance as well as continuous monitoring are set via the controller. The W2S-2 reduces the load on the machine control by using a counter, timestamp and false tripping suppression functions. Programmable sensors, adjustable via a 3-turn potentiometer, and sensors with fixed sensing distances of 15 mm, 30 mm, 45 mm and 60 mm are also available. • Machine design flexibility: the ultra-compact sensors offer above-average sensing distances and provide space-saving installation • Remote setup: sensors installed in confined spaces can be set and monitored remotely via IO-Link • High operational reliability: ultra-black objects are detected with a degree of reflection of 1% • Maximum reliability during object detection and option of a space-saving machine design without reflectors or through-beam systems • Quick and easy commissioning: the photoelectric retro-reflective sensor with autocollimation provides a clearly visible light spot for high process reliability • Universal application options: wide range of models enclosed in a rugged housing • Proven mounting and housing design Features • Sensor with background suppression and without any significant black/white shift • PinPoint 2.0 LED with extended sensing distances and high operating reserves • A variety of application possibilities thanks to clearly defined laser-like or line-shaped light spots • Detection of highly transparent and reflective objects using sensors with V-optics • Photoelectric retro-reflective sensor with autocollimation and a clearly visible light spot Applications • Detection of transparent ampules and vials in the pharmaceutical industry • Detection of solar cells • Detection of modules in smartphone production • Detection of small parts such as pins, screws and rings in mounting technology • Detection of parts in grippers -
LFP0450-A5NMC Level Sensor, Rod Probe, 450mm Long, G3/4A, 1 x PNP + 3 x PNP/NPN + 4 mA … 20 mA, M12 8 Pin Connector (1063801)
$983.25 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
RE27-SA68LS04 Non-Contact Magentic Safety Switch, 2 N/O Contacts, 1 Signalling Contact, 0.2m Cable w/ M12 8 Pin Connector (1065233)
$145.02 inc. GSTAvailable on backorder
RE2 magnetic safety switches are equipped with either complementary NC/NO contacts or equivalent N/O contacts which are addressed directly with coded magnetic actuators. Magnetic safety switches are used in areas where a high level of contamination occurs. They are simple to clean, thereby enabling high standards of hygiene. Their principle of operation enables greater tolerances, making them ideal for applications where precise guidance of the protective device is difficult. • Response range of up to 9 mm • 2 or 3 contacts • Up to performance level PL e / Cat. 4 (EN ISO 13849) • Sensors with plug connector or connected cable • LED status indicator (RE27) • Flexi Loop-compatible M12 plug connector (depending on variant) Features • Long service life due to durable and low-maintenance design • Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849) • High level of machine availability due to high tolerances for door misalignment • The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards • Fast diagnostics via LED status indicator (RE27) • Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort. -
LFP0550-A4NMB Level Sensor, Rod Probe, 550mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1066639)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0450-A4NMB Level Sensor, Rod Probe, 450 m Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1068468)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0250-A4NMB Level Sensor, Rod Probe, 250mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1071554)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0580-A4NMB Level Sensor, Rod Probe, 580mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1071874)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP1000-A4NMBL Level Sensor, Rod Probe, 1,000mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1073549)
$2,046.72 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP2000-A4NMBL Level Sensor, Rod Probe, 2,000mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1073550)
$2,046.72 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
MICS3-AAAZ40AZ1P01 Safety Laser Scanner, microScan3 Core I/O, 4m Range, M12 8 Pin Male Connector (1075842)
$8,450.16 inc. GSTAvailable on backorder
The microScan3 safety laser scanner stands for the protection of very different applications: from stationary to mobile, from simple to complex. The innovative safeHDDM® scanning technology makes the microScan3 extremely resistant, even to dust and ambient light, and delivers high-precision measurement data. It increases the productivity and availability of machines. The different variants of the microScan3 can be integrated simply and safely into countless networks. In addition, the safety laser scanner offers standardized connectivity for time-saving commissioning. The microScan3, the easy handling of its Safety Designer configuration software and its diagnostic options combine user-friendly operation, innovation and very high performance. • Innovative safeHDDM® scanning technology • High-precision measurement data via Ethernet interface • Protective field range: up to 9 m, scanning angle: 275° • Up to 128 freely configurable fields and up to 8 simultaneous protective fields • Standardized communication interfaces • System plug with configuration memory Features • Very high machine availability and productivity thanks to the patented safeHDDM® scanning technology • Flexibility for safe automation processes due to simultaneous protective fields, contour detection fields and detailed data output • Safe integration into different control systems via EtherNet/IP™ CIP Safety™, PROFINET PROFIsafe, EtherCAT® FSoE, I/O etc. • Saves time during commissioning and diagnostics thanks to the intuitive Safety Designer software, multi-color display and system plug -
MICS3-AAAZ55AZ1P01 Safety Laser Scanner, microScan3 Core I/O, 5.5m Range, M12 8 Pin Male Connector (1075843)
$9,398.43 inc. GSTAvailable on backorder
The microScan3 safety laser scanner stands for the protection of very different applications: from stationary to mobile, from simple to complex. The innovative safeHDDM® scanning technology makes the microScan3 extremely resistant, even to dust and ambient light, and delivers high-precision measurement data. It increases the productivity and availability of machines. The different variants of the microScan3 can be integrated simply and safely into countless networks. In addition, the safety laser scanner offers standardized connectivity for time-saving commissioning. The microScan3, the easy handling of its Safety Designer configuration software and its diagnostic options combine user-friendly operation, innovation and very high performance. • Innovative safeHDDM® scanning technology • High-precision measurement data via Ethernet interface • Protective field range: up to 9 m, scanning angle: 275° • Up to 128 freely configurable fields and up to 8 simultaneous protective fields • Standardized communication interfaces • System plug with configuration memory Features • Very high machine availability and productivity thanks to the patented safeHDDM® scanning technology • Flexibility for safe automation processes due to simultaneous protective fields, contour detection fields and detailed data output • Safe integration into different control systems via EtherNet/IP™ CIP Safety™, PROFINET PROFIsafe, EtherCAT® FSoE, I/O etc. • Saves time during commissioning and diagnostics thanks to the intuitive Safety Designer software, multi-color display and system plug -
RE21-SA84 Non-Contact Magentic Safety Switch, 1 N/O Contacts, 1 N/C Contacts, 0.2m Cable w/ M8 4 Pin Connector (1083850)
$120.34 inc. GSTAvailable on backorder
RE2 magnetic safety switches are equipped with either complementary NC/NO contacts or equivalent N/O contacts which are addressed directly with coded magnetic actuators. Magnetic safety switches are used in areas where a high level of contamination occurs. They are simple to clean, thereby enabling high standards of hygiene. Their principle of operation enables greater tolerances, making them ideal for applications where precise guidance of the protective device is difficult. • Response range of up to 9 mm • 2 or 3 contacts • Up to performance level PL e / Cat. 4 (EN ISO 13849) • Sensors with plug connector or connected cable • LED status indicator (RE27) • Flexi Loop-compatible M12 plug connector (depending on variant) Features • Long service life due to durable and low-maintenance design • Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849) • High level of machine availability due to high tolerances for door misalignment • The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards • Fast diagnostics via LED status indicator (RE27) • Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort. -
LFP0380-A5NMC Level Sensor, Rod Probe, 380mm Long, G3/4A, 1 x PNP + 3 x PNP/NPN + 4 mA … 20 mA, M12 8 Pin Connector (1084561)
$983.25 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0540-A4NMB Level Sensor, Rod Probe, 540mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1085083)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0420-A4NMB Level Sensor, Rod Probe, 420mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1086580)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
MICS3-AAAZ90AZ1P01 Safety Laser Scanner, microScan3 Core I/O, 9m Range, M12 8 Pin Male Connector (1089492)
$10,525.67 inc. GSTAvailable on backorder
The microScan3 safety laser scanner stands for the protection of very different applications: from stationary to mobile, from simple to complex. The innovative safeHDDM® scanning technology makes the microScan3 extremely resistant, even to dust and ambient light, and delivers high-precision measurement data. It increases the productivity and availability of machines. The different variants of the microScan3 can be integrated simply and safely into countless networks. In addition, the safety laser scanner offers standardized connectivity for time-saving commissioning. The microScan3, the easy handling of its Safety Designer configuration software and its diagnostic options combine user-friendly operation, innovation and very high performance. • Innovative safeHDDM® scanning technology • High-precision measurement data via Ethernet interface • Protective field range: up to 9 m, scanning angle: 275° • Up to 128 freely configurable fields and up to 8 simultaneous protective fields • Standardized communication interfaces • System plug with configuration memory Features • Very high machine availability and productivity thanks to the patented safeHDDM® scanning technology • Flexibility for safe automation processes due to simultaneous protective fields, contour detection fields and detailed data output • Safe integration into different control systems via EtherNet/IP™ CIP Safety™, PROFINET PROFIsafe, EtherCAT® FSoE, I/O etc. • Saves time during commissioning and diagnostics thanks to the intuitive Safety Designer software, multi-color display and system plug -
SIG100-0A0111100 SIG100 Sensor Integration Gateway, IO-Link, USB (1089792)
$298.27 inc. GSTAvailable on backorder
The SIG100 Sensor Integration Gateway is an IO-Link sensor hub that makes collecting and monitoring digital standard signals easier than ever. Logical decisions are made based on the user configuration, and the results are transmitted via IO-Link to any IO-Link master. Devices are parameterized quickly and easily via an integrated USB interface and the SOPAS ET graphical user interface. For various applications, a drag & drop logic editor enables the quick and easy creation of an autonomous sensor system that can be operated separately from the central controller (PLC). Features • Easy connection of binary sensors to any IO-Link master • Six configurable ports; each has two binary inputs or outputs for connecting up to 12 standard I/Os • Quick and easy configuration of an autonomous sensor system, which consists of binary inputs and outputs, via drag & drop logic links without an additional controller • Reduced wiring effort and expense by consolidating individual sensor signals into a single IO-Link messageI/O connection 6 x M12, 5-pin female connector, A-coded Connection Configuration 1 x M8, 4-pin female connector, USB 2.0 (USB-A) Logic editor Yes Communication interface IO-Link, USB Further Functions USB connection for easy configuration of the SIG100 Sensor Integration Gateway with SOPAS ET, the engineering tool from SICK, logic editor is available for easy configuration of logic functions
SICK Sensors
SICK’s sensors and switches play a critical role in industrial automation by providing accurate and real-time data for monitoring and controlling processes. These sensors are designed to meet the demanding requirements of modern manufacturing and logistics, contributing to increased productivity and safety.
One of the key strengths of SICK’s sensors is their versatility. The company offers a wide range of sensor types, including photoelectric sensors, proximity sensors, ultrasonic sensors, vision sensors, and more. Each sensor type is engineered to address specific challenges in industrial environments, whether it’s detecting objects, measuring distances, or ensuring the quality of a product on a production line. SICK’s commitment to innovation is evident in its continuous efforts to integrate Industry 4.0 and smart manufacturing principles into its sensor solutions. This includes features such as connectivity, data analytics, and remote monitoring, enabling businesses to optimise their processes and respond to changing demands in real-time.
SICK – Sensor Intelligence.
Developing intelligent solutions for customer applications is at the forefront of what we do. To make this a reality, we are constantly on the lookout for new technologies that allow sensors to not only perceive objects, but also offer intelligent process control and communicate with other components in complex networks.
SICK Switches
SICK is known for its safety solutions, and safety switches play a crucial role in ensuring the well-being of workers and the integrity of industrial processes. Safety switches are often used in applications where it is essential to monitor access points, such as gates and doors, to prevent hazardous situations. These switches are designed to meet stringent safety standards and regulations.
SICK LifeTime Services is an all-inclusive suite of superior services designed to assist with the whole life cycle of applications and products. These services boost machine performance, enhance worker safety, and lay the groundwork for clients’ long-term financial success. Their commitment to innovation, reliability, and versatility positions SICK as a trusted partner in providing sensor solutions that contribute to the advancement of automation and safety across various industries in Australia. Shop the complete SICK range with Aventum today!