SICK
SICK is a prominent worldwide producer of sensors, safety systems, and automated identification solutions intended for use in process, logistical, and factory automation. SICK provides affordable factory automation, distribution centre optimization, and monitoring solutions. SICK has almost 70 years of expertise in the market introducing cutting-edge solutions, making it the industry standard for automation applications.
From factory automation to logistics automation and process automation, SICK’s sensor solutions are keeping the industry moving. As a technology and market leader, SICK provides sensor intelligence and application solutions that create the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents, and preventing damage to the environment.
-
PL50A Reflector, Hexagonal, 58mm X 58mm (1000132)
$43.20 inc. GSTAvailable on backorder
Standard reflectors from SICK differ according to size, geometry and mounting options. The large selection of reflectors in different shapes and sizes guarantees optimal sensor operations at all times and perfect integration into systems. -
PL30A Reflector, Rectangular, 28mm X 56mm (1002314)
$43.20 inc. GSTAvailable on backorder
Standard reflectors from SICK differ according to size, geometry and mounting options. The large selection of reflectors in different shapes and sizes guarantees optimal sensor operations at all times and perfect integration into systems. -
PL80A Reflector, Square, 80mm X 80mm (1003865)
$62.94 inc. GSTAvailable on backorder
Standard reflectors from SICK differ according to size, geometry and mounting options. The large selection of reflectors in different shapes and sizes guarantees optimal sensor operations at all times and perfect integration into systems. -
Low Stock
PL20A Reflector, Rectangular, 15mm X 38mm (1012719)
$19.20 inc. GSTAvailable on backorder
Standard reflectors from SICK differ according to size, geometry and mounting options. The large selection of reflectors in different shapes and sizes guarantees optimal sensor operations at all times and perfect integration into systems. -
PL40A Reflector, Rectangular, 37mm X 56mm (1012720)
$32.91 inc. GSTAvailable on backorder
Standard reflectors from SICK differ according to size, geometry and mounting options. The large selection of reflectors in different shapes and sizes guarantees optimal sensor operations at all times and perfect integration into systems. -
WTB4-3P2261 Photoelectric Proximity Sensor, Background Supression, Sn= 4mm … 150mm, PNP, M8 4 Pin Male Connector (1028100)
Available on backorder
The W4S-3 family of photoelectric sensors offers best-in-class performance in a slim housing design. The universal use of the latest ASIC and PinPoint LED technologies provides maximum reliability in the detection of all objects, including transparent and shiny objects like blisters, e-cards and aluminium cans. Optical axes on the flat side enable simple, space-saving integration in the machine environment - even without separate mounting brackets. • Application versatility due to reliable detection of shiny, transparent or jet-black objects • Very quick and easy alignment due to the highly visible, intense PinPoint LED light spot • Rugged mounting system with M3 threaded metal inserts reduces maintenance costs due to a long service life • Background suppression sensors with a laser-like light spot reduce costs and installation of additional protective measures by replacing laser sensors • IO-Link provides easy data access from the PLC • Quick and easy configuration • Quick and easy integration using function blocks Features • Best background suppression sensor in its class • Universal use of PinPoint LED technology in all models • BGS proximity sensor with a laser-like light spot for precise detection tasks • Reliable setting via 5-turn potentiometer, teach-in pushbutton, teach-in via cable or IO-Link • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link -
WLG4-3P2132 Photoelectric Retro-Reflective Sensor, Dual Lens, Sn= 0.01m … 4.5m, PNP, M8 3 Pin Male Connector (6011038)
$296.21 inc. GSTAvailable on backorder
The W150 photoelectric sensors product family includes a background suppression sensor, an energetic proximity sensor, a retroreflective sensor and a through-beam photoelectric sensor. This product family features an extra-small design, which enables usage in the smallest of machines. • Reliable detection of the smallest objects, regardless of colour or surface qualities • Detection of objects regardless of colour or surface qualities • Suitable for high-speed applications • Brackets included with delivery, ensuring quick and easy installation • Highly visible red light simplifies alignment Features • Extra small plastic housing • IP 67 enclosure rating • Highly visible red light • Light or dark switching selectable by wire -
WTV4-3P3441S38 Photoelectric Proximity Sensor, Background Supression, Sn= 4mm … 50mm, PNP, M12 4 Pin Male Connector (1040696)
Available on backorder
The W4S-3 family of photoelectric sensors offers best-in-class performance in a slim housing design. The universal use of the latest ASIC and PinPoint LED technologies provides maximum reliability in the detection of all objects, including transparent and shiny objects like blisters, e-cards and aluminium cans. Optical axes on the flat side enable simple, space-saving integration in the machine environment - even without separate mounting brackets. • Application versatility due to reliable detection of shiny, transparent or jet-black objects • Very quick and easy alignment due to the highly visible, intense PinPoint LED light spot • Rugged mounting system with M3 threaded metal inserts reduces maintenance costs due to a long service life • Background suppression sensors with a laser-like light spot reduce costs and installation of additional protective measures by replacing laser sensors • IO-Link provides easy data access from the PLC • Quick and easy configuration • Quick and easy integration using function blocks Features • Best background suppression sensor in its class • Universal use of PinPoint LED technology in all models • BGS proximity sensor with a laser-like light spot for precise detection tasks • Reliable setting via 5-turn potentiometer, teach-in pushbutton, teach-in via cable or IO-Link • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link -
WTB4S-3P2265V Photoelectric Proximity Sensor, Background Supression, Sn= 4mm … 500mm, PNP, M8 4 Pin Male Connector (1045091)
$471.05 inc. GSTAvailable on backorder
The W4S-3 INOX product family in WashDown design combines rugged watertight IP 69K stainless steel housing with “best-in-class” optical functionality. These space-saving miniature sensors are able to withstand the most aggressive cleaning agents and disinfectants thanks to a membrane teach-in button that is 100% watertight and pin-cast M12 connections. They can be relied upon for long-term service in critical applications in the food and beverage, pharmaceutical, solar, and electronics industries. • Long service life in harsh conditions ensures less downtime and fewer replacement costs • Quick and easy alignment due to highly visible PinPoint emitter LED • Easy adjustment via a stainless steel metal membrane teach-in pushbutton • IO-Link provides easy data access from the PLC • Quick and easy configuration • Quick and easy integration using function blocks • Easy device replacement and identification Features • WashDown rated for fluid-tightness (IP 66, IP 67, IP 68 and IP 69K) and Ecolab certified • Tough stainless steel housing (316L/1.4404) • Resistant to a variety of common cleaning and disinfection agents • Highly visible laser-like light spot due to PinPoint LED • Teach-in via stainless steel pushbutton with a metal membrane • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link -
WLG4S-3P3432V Photoelectric Retro-Reflective Sensor, Autocollimation, Sn= 0m … 5m, PNP, Cable with M12 4 Pin Male Connector (1046449)
$489.57 inc. GSTAvailable on backorder
The W4S-3 INOX product family in WashDown design combines rugged watertight IP 69K stainless steel housing with "best-in-class" optical functionality. These space-saving miniature sensors are able to withstand the most aggressive cleaning agents and disinfectants thanks to a membrane teach-in button that is 100% watertight and pin-cast M12 connections. They can be relied upon for long-term service in critical applications in the food and beverage, pharmaceutical, solar, and electronics industries. • Long service life in harsh conditions ensures less downtime and fewer replacement costs • Quick and easy alignment due to highly visible PinPoint emitter LED • Easy adjustment via a stainless steel metal membrane teach-in pushbutton • IO-Link provides easy data access from the PLC • Quick and easy configuration • Quick and easy integration using function blocks • Easy device replacement and identification Features • WashDown rated for fluid-tightness (IP 66, IP 67, IP 68 and IP 69K) and Ecolab certified • Tough stainless steel housing (316L/1.4404) • Resistant to a variety of common cleaning and disinfection agents • Highly visible laser-like light spot due to PinPoint LED • Teach-in via stainless steel pushbutton with a metal membrane • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link -
WSE4S-3N1330H Through-Beam Photoelectric Sensor, Sn= 0m … 5m, NPN, Cable, 2-wire 2m (1052872)
$306.49 inc. GSTAvailable on backorder
The W4S-3 family of photoelectric sensors offers best-in-class performance in a slim housing design. The universal use of the latest ASIC and PinPoint LED technologies to provide maximum reliability in the detection of all objects, including transparent and shiny objects like blisters, e-cards and aluminium cans. Optical axes on the flat side enable simple, space-saving integration in the machine environment - even without separate mounting brackets. • Application versatility due to reliable detection of shiny, transparent or jet-black objects • Very quick and easy alignment due to the highly visible, intense PinPoint LED light spot • Rugged mounting system with M3 threaded metal inserts reduces maintenance costs due to a long service life • Background suppression sensors with a laser-like light spot reduce costs and installation of additional protective measures by replacing laser sensors • IO-Link provides easy data access from the PLC • Quick and easy configuration • Quick and easy integration using the function block Features • Best background suppression sensor in its class • Universal use of PinPoint LED technology in all models • BGS proximity sensor with a laser-like light spot for precise detection tasks • Reliable setting via 5-turn potentiometer, teach-in pushbutton, teach-in via cable or IO-Link • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link -
WTB4S-3P2462V Photoelectric Proximity Sensor, Background Supression, Sn= 4mm … 500mm, PNP, M12 4 Pin Male Connector (1054675)
$471.05 inc. GSTAvailable on backorder
The W4S-3 INOX product family in WashDown design combines rugged watertight IP 69K stainless steel housing with "best-in-class" optical functionality. These space-saving miniature sensors are able to withstand the most aggressive cleaning agents and disinfectants thanks to a membrane teach-in button that is 100% watertight and pin-cast M12 connections. They can be relied upon for long-term service in critical applications in the food and beverage, pharmaceutical, solar, and electronics industries. • Long service life in harsh conditions ensures less downtime and fewer replacement costs • Quick and easy alignment due to highly visible PinPoint emitter LED • Easy adjustment via a stainless steel metal membrane teach-in pushbutton • IO-Link provides easy data access from the PLC • Quick and easy configuration • Quick and easy integration using function blocks • Easy device replacement and identification Features • WashDown rated for fluid-tightness (IP 66, IP 67, IP 68 and IP 69K) and Ecolab certified • Tough stainless steel housing (316L/1.4404) • Resistant to a variety of common cleaning and disinfection agents • Highly visible laser-like light spot due to PinPoint LED • Teach-in via stainless steel pushbutton with a metal membrane • Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link -
LFP0200-A4NMB Level Sensor, Rod Probe, 200mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057073)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0300-A4NMB Level Sensor, Rod Probe, 300mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057074)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0400-A4NMB Level Sensor, Rod Probe, 400mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057075)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0500-A4NMB Level Sensor, Rod Probe, 500mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057076)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0600-A4NMB Level Sensor, Rod Probe, 600mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057077)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0700-A4NMB Level Sensor, Rod Probe, 700mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057078)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0800-A4NMB Level Sensor, Rod Probe, 800mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057079)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP0900-A4NMB Level Sensor, Rod Probe, 900mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057080)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money
SICK Sensors
SICK’s sensors and switches play a critical role in industrial automation by providing accurate and real-time data for monitoring and controlling processes. These sensors are designed to meet the demanding requirements of modern manufacturing and logistics, contributing to increased productivity and safety.
One of the key strengths of SICK’s sensors is their versatility. The company offers a wide range of sensor types, including photoelectric sensors, proximity sensors, ultrasonic sensors, vision sensors, and more. Each sensor type is engineered to address specific challenges in industrial environments, whether it’s detecting objects, measuring distances, or ensuring the quality of a product on a production line. SICK’s commitment to innovation is evident in its continuous efforts to integrate Industry 4.0 and smart manufacturing principles into its sensor solutions. This includes features such as connectivity, data analytics, and remote monitoring, enabling businesses to optimise their processes and respond to changing demands in real-time.
SICK – Sensor Intelligence.
Developing intelligent solutions for customer applications is at the forefront of what we do. To make this a reality, we are constantly on the lookout for new technologies that allow sensors to not only perceive objects, but also offer intelligent process control and communicate with other components in complex networks.
SICK Switches
SICK is known for its safety solutions, and safety switches play a crucial role in ensuring the well-being of workers and the integrity of industrial processes. Safety switches are often used in applications where it is essential to monitor access points, such as gates and doors, to prevent hazardous situations. These switches are designed to meet stringent safety standards and regulations.
SICK LifeTime Services is an all-inclusive suite of superior services designed to assist with the whole life cycle of applications and products. These services boost machine performance, enhance worker safety, and lay the groundwork for clients’ long-term financial success. Their commitment to innovation, reliability, and versatility positions SICK as a trusted partner in providing sensor solutions that contribute to the advancement of automation and safety across various industries in Australia. Shop the complete SICK range with Aventum today!
