SICK
SICK is a prominent worldwide producer of sensors, safety systems, and automated identification solutions intended for use in process, logistical, and factory automation. SICK provides affordable factory automation, distribution centre optimization, and monitoring solutions. SICK has almost 70 years of expertise in the market introducing cutting-edge solutions, making it the industry standard for automation applications.
From factory automation to logistics automation and process automation, SICK’s sensor solutions are keeping the industry moving. As a technology and market leader, SICK provides sensor intelligence and application solutions that create the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents, and preventing damage to the environment.
-
LFP1000-A4NMB Level Sensor, Rod Probe, 1,000mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057081)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP1100-A4NMB Level Sensor, Rod Probe, 1,100mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057082)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP1200-A4NMB Level Sensor, Rod Probe, 1,200mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057083)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP1300-A4NMB Level Sensor, Rod Probe, 1,300mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057084)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP1400-A4NMB Level Sensor, Rod Probe, 1,400mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057085)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP1500-A4NMB Level Sensor, Rod Probe, 1,500mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057086)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP1600-A4NMB Level Sensor, Rod Probe, 1,600mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057087)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP1700-A4NMB Level Sensor, Rod Probe, 1,700mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057088)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP1800-A4NMB Level Sensor, Rod Probe, 1,800mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057089)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP1900-A4NMB Level Sensor, Rod Probe, 1,900mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057090)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
LFP2000-A4NMB Level Sensor, Rod Probe, 2,000mm Long, G3/4A, 1 x PNP + 1 x PNP/NPN + 4 mA … 20 mA, M12 5 Pin Connector (1057091)
$923.59 inc. GSTAvailable on backorder
The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use. • Level sensor for liquids • No mechanical moving parts • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm) • Resistant to deposit formation • Process temperature up to 100 °C,process pressure up to 10 bar • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output • High enclosure rating of IP 67, rotatable housing and remote amplifier • IO-Link 1.1 Features • Rugged design increases service life • High flexibility with interchangeable rod probe or cable probe that can be cut to length • Cost savings due to multiple output signals: One system for both point level and continuous level measurement • Maintenance-free and easy to commission without calibration, saving time and money • Titanium process connection is highly resistant to chemicals • Compact, rotatable housing and remote amplifier for flexible installation • High availability, even when several sensors are installed in parallel, since there is no mutual device interference • Universal technology facilitating calibration-free measurement saves time and money -
WL4SLG-3P2232V Photoelectric Retro-Reflective Sensor, Autocollimation, Sn= 0m … 4.5m, PNP, M8 4 Pin Male Connector (1058258)
$633.56 inc. GSTAvailable on backorder
A single press of a button on the WL4SLG-3 Inox allows operation in the detection mode for transparent and/or non-transparent objects. This means that one device can be used to detect transparent vials and PET bottles, but also metallic needles and wires, for example. The precise, highly visible laser light spot with sharp contour ensures a high level of detection quality and facilitates alignment. Autocollimation technology ensures that the sensor reliably detects objects at close range as well as through narrow gaps or small drilled holes. The photoelectric sensors also feature an IO-Link function, so that initial system performance diagnostics can be done independently. Furthermore, IO-Link permits the integration of additional functions such as meters or profile recognition directly into the sensor. There is no need for complex control programming. • Precise laser light spot for highly accurate switching behaviour • Washdown stainless steel housing reduces the risk of microbacterial contamination • Washdown design with sealed connections and patented membrane teach-in button • The highest degree of machine design flexibility. Autocollimation permits detection even through small drilled holes • One sensor for detecting both transparent objects and the smallest non-transparent objects, The corresponding mode can be set simply at the touch of a button for sensing ranges of up to 8 m • IO-Link facilitates initial system performance diagnostics and uses additional sensor functions to reduce complex control programming Features • Precise laser light spot, laser class 1, no blind spots • Stainless steel housing with washdown design • Latest SICK proprietary ASIC and laser technologies for very good background suppression and ambient light immunity • ECOLAB certified, tested to IP66, IP67, IP68 and IP69K enclosure rating • Teach-in pushbutton can be switched between detection of transparent and tiny non-transparent objects • IO-Link (optional) Applications • Precise object positioning – Detection of slices of sausage before primary packaging on a coarse-meshed, hygienic conveyor • Precise edge detection – Controlling the exact position of ampulla-tubes before the final closing • Application are mostly in the pharmaceutical industry but also e.g. at the packaging, electronic and solar industry as well as food beverage industry -
RE21-SAC Non-Contact Magentic Safety Switch, 1 N/O Contacts, 1 N/C Contacts, M8 4 Pin Connector (1059505)
$104.91 inc. GSTAvailable on backorder
RE2 magnetic safety switches are equipped with either complementary NC/NO contacts or equivalent N/O contacts which are addressed directly with coded magnetic actuators. Magnetic safety switches are used in areas where a high level of contamination occurs. They are simple to clean, thereby enabling high standards of hygiene. Their principle of operation enables greater tolerances, making them ideal for applications where precise guidance of the protective device is difficult. • Response range of up to 9 mm • 2 or 3 contacts • Up to performance level PL e / Cat. 4 (EN ISO 13849) • Sensors with plug connector or connected cable • LED status indicator (RE27) • Flexi Loop-compatible M12 plug connector (depending on variant) Features • Long service life due to durable and low-maintenance design • Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849) • High level of machine availability due to high tolerances for door misalignment • The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards • Fast diagnostics via LED status indicator (RE27) • Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort. -
RE21-SA03 Non-Contact Magentic Safety Switch, 1 N/O Contacts, 1 N/C Contacts, 3m Cable (1059506)
$87.22 inc. GSTAvailable on backorder
RE2 magnetic safety switches are equipped with either complementary NC/NO contacts or equivalent N/O contacts which are addressed directly with coded magnetic actuators. Magnetic safety switches are used in areas where a high level of contamination occurs. They are simple to clean, thereby enabling high standards of hygiene. Their principle of operation enables greater tolerances, making them ideal for applications where precise guidance of the protective device is difficult. • Response range of up to 9 mm • 2 or 3 contacts • Up to performance level PL e / Cat. 4 (EN ISO 13849) • Sensors with plug connector or connected cable • LED status indicator (RE27) • Flexi Loop-compatible M12 plug connector (depending on variant) Features • Long service life due to durable and low-maintenance design • Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849) • High level of machine availability due to high tolerances for door misalignment • The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards • Fast diagnostics via LED status indicator (RE27) • Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort. -
RE21-SA05 Non-Contact Magentic Safety Switch, 1 N/O Contacts, 1 N/C Contacts, 5m Cable (1059507)
$95.24 inc. GSTAvailable on backorder
RE2 magnetic safety switches are equipped with either complementary NC/NO contacts or equivalent N/O contacts which are addressed directly with coded magnetic actuators. Magnetic safety switches are used in areas where a high level of contamination occurs. They are simple to clean, thereby enabling high standards of hygiene. Their principle of operation enables greater tolerances, making them ideal for applications where precise guidance of the protective device is difficult. • Response range of up to 9 mm • 2 or 3 contacts • Up to performance level PL e / Cat. 4 (EN ISO 13849) • Sensors with plug connector or connected cable • LED status indicator (RE27) • Flexi Loop-compatible M12 plug connector (depending on variant) Features • Long service life due to durable and low-maintenance design • Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849) • High level of machine availability due to high tolerances for door misalignment • The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards • Fast diagnostics via LED status indicator (RE27) • Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort. -
RE23-SAC Non-Contact Magentic Safety Switch, 2 N/O Contacts, M8 4 Pin Connector (1059508)
$124.45 inc. GSTAvailable on backorder
RE2 magnetic safety switches are equipped with either complementary NC/NO contacts or equivalent N/O contacts which are addressed directly with coded magnetic actuators. Magnetic safety switches are used in areas where a high level of contamination occurs. They are simple to clean, thereby enabling high standards of hygiene. Their principle of operation enables greater tolerances, making them ideal for applications where precise guidance of the protective device is difficult. • Response range of up to 9 mm • 2 or 3 contacts • Up to performance level PL e / Cat. 4 (EN ISO 13849) • Sensors with plug connector or connected cable • LED status indicator (RE27) • Flexi Loop-compatible M12 plug connector (depending on variant) Features • Long service life due to durable and low-maintenance design • Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849) • High level of machine availability due to high tolerances for door misalignment • The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards • Fast diagnostics via LED status indicator (RE27) • Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort. -
RE27-SA68L Non-Contact Magentic Safety Switch, 2 N/O Contacts, 1 Signalling Contact, 0.2m Cable w/ M12 8 Pin Connector (1059509)
$145.02 inc. GSTAvailable on backorder
RE2 magnetic safety switches are equipped with either complementary NC/NO contacts or equivalent N/O contacts which are addressed directly with coded magnetic actuators. Magnetic safety switches are used in areas where a high level of contamination occurs. They are simple to clean, thereby enabling high standards of hygiene. Their principle of operation enables greater tolerances, making them ideal for applications where precise guidance of the protective device is difficult. • Response range of up to 9 mm • 2 or 3 contacts • Up to performance level PL e / Cat. 4 (EN ISO 13849) • Sensors with plug connector or connected cable • LED status indicator (RE27) • Flexi Loop-compatible M12 plug connector (depending on variant) Features • Long service life due to durable and low-maintenance design • Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849) • High level of machine availability due to high tolerances for door misalignment • The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards • Fast diagnostics via LED status indicator (RE27) • Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort. -
RE27-SA05L Non-Contact Magentic Safety Switch, 2 N/O Contacts, 1 Signalling Contact, 5m Cable (1059510)
$121.36 inc. GSTAvailable on backorder
RE2 magnetic safety switches are equipped with either complementary NC/NO contacts or equivalent N/O contacts which are addressed directly with coded magnetic actuators. Magnetic safety switches are used in areas where a high level of contamination occurs. They are simple to clean, thereby enabling high standards of hygiene. Their principle of operation enables greater tolerances, making them ideal for applications where precise guidance of the protective device is difficult. • Response range of up to 9 mm • 2 or 3 contacts • Up to performance level PL e / Cat. 4 (EN ISO 13849) • Sensors with plug connector or connected cable • LED status indicator (RE27) • Flexi Loop-compatible M12 plug connector (depending on variant) Features • Long service life due to durable and low-maintenance design • Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849) • High level of machine availability due to high tolerances for door misalignment • The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards • Fast diagnostics via LED status indicator (RE27) • Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort. -
RE27-SA10L Non-Contact Magentic Safety Switch, 2 N/O Contacts, 1 Signalling Contact, 10m Cable (1059511)
$139.88 inc. GSTAvailable on backorder
RE2 magnetic safety switches are equipped with either complementary NC/NO contacts or equivalent N/O contacts which are addressed directly with coded magnetic actuators. Magnetic safety switches are used in areas where a high level of contamination occurs. They are simple to clean, thereby enabling high standards of hygiene. Their principle of operation enables greater tolerances, making them ideal for applications where precise guidance of the protective device is difficult. • Response range of up to 9 mm • 2 or 3 contacts • Up to performance level PL e / Cat. 4 (EN ISO 13849) • Sensors with plug connector or connected cable • LED status indicator (RE27) • Flexi Loop-compatible M12 plug connector (depending on variant) Features • Long service life due to durable and low-maintenance design • Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849) • High level of machine availability due to high tolerances for door misalignment • The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards • Fast diagnostics via LED status indicator (RE27) • Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort. -
RE27-SA20L Non-Contact Magentic Safety Switch, 2 N/O Contacts, 1 Signalling Contact, 20m Cable (1059512)
$198.51 inc. GSTAvailable on backorder
RE2 magnetic safety switches are equipped with either complementary NC/NO contacts or equivalent N/O contacts which are addressed directly with coded magnetic actuators. Magnetic safety switches are used in areas where a high level of contamination occurs. They are simple to clean, thereby enabling high standards of hygiene. Their principle of operation enables greater tolerances, making them ideal for applications where precise guidance of the protective device is difficult. • Response range of up to 9 mm • 2 or 3 contacts • Up to performance level PL e / Cat. 4 (EN ISO 13849) • Sensors with plug connector or connected cable • LED status indicator (RE27) • Flexi Loop-compatible M12 plug connector (depending on variant) Features • Long service life due to durable and low-maintenance design • Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849) • High level of machine availability due to high tolerances for door misalignment • The devices are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards • Fast diagnostics via LED status indicator (RE27) • Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort.
SICK Sensors
SICK’s sensors and switches play a critical role in industrial automation by providing accurate and real-time data for monitoring and controlling processes. These sensors are designed to meet the demanding requirements of modern manufacturing and logistics, contributing to increased productivity and safety.
One of the key strengths of SICK’s sensors is their versatility. The company offers a wide range of sensor types, including photoelectric sensors, proximity sensors, ultrasonic sensors, vision sensors, and more. Each sensor type is engineered to address specific challenges in industrial environments, whether it’s detecting objects, measuring distances, or ensuring the quality of a product on a production line. SICK’s commitment to innovation is evident in its continuous efforts to integrate Industry 4.0 and smart manufacturing principles into its sensor solutions. This includes features such as connectivity, data analytics, and remote monitoring, enabling businesses to optimise their processes and respond to changing demands in real-time.
SICK – Sensor Intelligence.
Developing intelligent solutions for customer applications is at the forefront of what we do. To make this a reality, we are constantly on the lookout for new technologies that allow sensors to not only perceive objects, but also offer intelligent process control and communicate with other components in complex networks.
SICK Switches
SICK is known for its safety solutions, and safety switches play a crucial role in ensuring the well-being of workers and the integrity of industrial processes. Safety switches are often used in applications where it is essential to monitor access points, such as gates and doors, to prevent hazardous situations. These switches are designed to meet stringent safety standards and regulations.
SICK LifeTime Services is an all-inclusive suite of superior services designed to assist with the whole life cycle of applications and products. These services boost machine performance, enhance worker safety, and lay the groundwork for clients’ long-term financial success. Their commitment to innovation, reliability, and versatility positions SICK as a trusted partner in providing sensor solutions that contribute to the advancement of automation and safety across various industries in Australia. Shop the complete SICK range with Aventum today!