-
CDS10080 Cable Ducting with Cover, Grey 100mm X 80mm (2m)
$64.60 inc. GSTAvailable on backorder
Cable ducting is used to organise the wiring vertically and horizontally inside a control system or distribution electrical enclosure. This product can be cut to length without using a saw. After making 2 lateral cuts with the Legrand tool cat. no 36710, the ducting can be separated manually by a simple snap, thanks to the cut-outs on the bottom (quick, no dust, no burrs). Also, it can be used to create a T junction between vertical and horizontal ducting all the way along, with no obstacles. • 6.5 mm wide fingers with a 6 mm spacing • Accepts up to 6 mm² without breaking sidewall finger • Two pre-scored lines allow removal of fingers 2 m in length • Bump on sidewall fingers help to cable • Rounded fingers prevent injury during cabling • 1 Year Warranty -
CDS2560 Cable Ducting with Cover, Grey 25mm X 60mm (2m)
$28.01 inc. GST3 in stock (can be backordered)
Cable ducting is used to organise the wiring vertically and horizontally inside a control system or distribution electrical enclosure. This product can be cut to length without using a saw. After making 2 lateral cuts with the Legrand tool cat. no 36710, the ducting can be separated manually by a simple snap, thanks to the cut-outs on the bottom (quick, no dust, no burrs). Also, it can be used to create a T junction between vertical and horizontal ducting all the way along, with no obstacles. • 6.5 mm wide fingers with a 6 mm spacing • Accepts up to 6 mm² without breaking sidewall finger • Two pre-scored lines allow removal of fingers 2 m in length • Bump on sidewall fingers help to cable • Rounded fingers prevent injury during cabling • 1 Year Warranty -
CDS4040 Cable Ducting with Cover, Grey 40mm X 40mm (2m)
$19.95 inc. GST3 in stock (can be backordered)
Cable ducting is used to organise the wiring vertically and horizontally inside a control system or distribution electrical enclosure. This product can be cut to length without using a saw. After making 2 lateral cuts with the Legrand tool cat. no 36710, the ducting can be separated manually by a simple snap, thanks to the cut-outs on the bottom (quick, no dust, no burrs). Also, it can be used to create a T junction between vertical and horizontal ducting all the way along, with no obstacles. • 6.5 mm wide fingers with a 6 mm spacing • Accepts up to 6 mm² without breaking sidewall finger • Two pre-scored lines allow removal of fingers 2 m in length • Bump on sidewall fingers help to cable • Rounded fingers prevent injury during cabling • 1 Year Warranty -
CDS4060 Cable Ducting with Cover, Grey 40mm X 60mm (2m)
$26.03 inc. GST2 in stock (can be backordered)
Cable ducting is used to organise the wiring vertically and horizontally inside a control system or distribution electrical enclosure. This product can be cut to length without using a saw. After making 2 lateral cuts with the Legrand tool cat. no 36710, the ducting can be separated manually by a simple snap, thanks to the cut-outs on the bottom (quick, no dust, no burrs). Also, it can be used to create a T junction between vertical and horizontal ducting all the way along, with no obstacles. • 6.5 mm wide fingers with a 6 mm spacing • Accepts up to 6 mm² without breaking sidewall finger • Two pre-scored lines allow removal of fingers 2 m in length • Bump on sidewall fingers help to cable • Rounded fingers prevent injury during cabling • 1 Year Warranty -
CDS4080 Cable Ducting with Cover, Grey 40mm X 80mm (2m)
$32.56 inc. GST2 in stock (can be backordered)
Cable ducting is used to organise the wiring vertically and horizontally inside a control system or distribution electrical enclosure. This product can be cut to length without using a saw. After making 2 lateral cuts with the Legrand tool cat. no 36710, the ducting can be separated manually by a simple snap, thanks to the cut-outs on the bottom (quick, no dust, no burrs). Also, it can be used to create a T junction between vertical and horizontal ducting all the way along, with no obstacles. • 6.5 mm wide fingers with a 6 mm spacing • Accepts up to 6 mm² without breaking sidewall finger • Two pre-scored lines allow removal of fingers 2 m in length • Bump on sidewall fingers help to cable • Rounded fingers prevent injury during cabling • 1 Year Warranty -
CDS6060 Cable Ducting with Cover, Grey 60mm X 60mm (2m)
$31.00 inc. GST1 in stock (can be backordered)
Cable ducting is used to organise the wiring vertically and horizontally inside a control system or distribution electrical enclosure. This product can be cut to length without using a saw. After making 2 lateral cuts with the Legrand tool cat. no 36710, the ducting can be separated manually by a simple snap, thanks to the cut-outs on the bottom (quick, no dust, no burrs). Also, it can be used to create a T junction between vertical and horizontal ducting all the way along, with no obstacles. • 6.5 mm wide fingers with a 6 mm spacing • Accepts up to 6 mm² without breaking sidewall finger • Two pre-scored lines allow removal of fingers 2 m in length • Bump on sidewall fingers help to cable • Rounded fingers prevent injury during cabling • 1 Year Warranty -
CDS8060 Cable Ducting with Cover, Grey 80mm X 60mm (2m)
$27.59 inc. GST3 in stock (can be backordered)
Cable ducting is used to organise the wiring vertically and horizontally inside a control system or distribution electrical enclosure. This product can be cut to length without using a saw. After making 2 lateral cuts with the Legrand tool cat. no 36710, the ducting can be separated manually by a simple snap, thanks to the cut-outs on the bottom (quick, no dust, no burrs). Also, it can be used to create a T junction between vertical and horizontal ducting all the way along, with no obstacles. • 6.5 mm wide fingers with a 6 mm spacing • Accepts up to 6 mm² without breaking sidewall finger • Two pre-scored lines allow removal of fingers 2 m in length • Bump on sidewall fingers help to cable • Rounded fingers prevent injury during cabling • 1 Year Warranty -
CDS8080 Cable Ducting with Cover, Grey 80mm X 80mm (2m)
$51.24 inc. GST3 in stock (can be backordered)
Cable ducting is used to organise the wiring vertically and horizontally inside a control system or distribution electrical enclosure. This product can be cut to length without using a saw. After making 2 lateral cuts with the Legrand tool cat. no 36710, the ducting can be separated manually by a simple snap, thanks to the cut-outs on the bottom (quick, no dust, no burrs). Also, it can be used to create a T junction between vertical and horizontal ducting all the way along, with no obstacles. • 6.5 mm wide fingers with a 6 mm spacing • Accepts up to 6 mm² without breaking sidewall finger • Two pre-scored lines allow removal of fingers 2 m in length • Bump on sidewall fingers help to cable • Rounded fingers prevent injury during cabling • 1 Year Warranty